Supero SuperServer 7042P-8R, User Manual

Page: 42 / 106

5-8
S
UPERSERVER 7042P-8R User’s Manual
Figure 5-5b. Top View of DIMM Slot
Figure 5-5a. Side View of DIMM Installation into Slot
To Install: Insert module vertically and press down until it snaps into
place. Pay attention to the bottom notch.
To Remove: Use your thumbs to gently push each release tab outward
to free the DIMM from the slot.
Memory Support
The P4DP8-G2 only supports ECC registered PC1600 (DDR-200) memory.
PC2100 (DDR-266) is supported but only at 200 MHz (PC1600 speed).
PC100/133 SDRAM is not supported. To maintain server reliability, it is
strongly recommended that you do not mix DIMMs of different sizes and
(especially) speeds. It is best if all memory modules are completely identi-
cal. See Figures 5-5a and 5-5b for installing and removing memory mod-
ules.