SUPERSERVER 7042P-8R User's Manual
3-2
l
RESET:
Use the reset button to reboot the system.
3-3
Control Panel LEDs
The control panel located on the front of the SC742S-420 chassis has six
LEDs that provide you with critical information related to different parts of
the system. This section explains what each LED indicates when illumi-
nated and any corrective action you may need to take.
l
Power:
Indicates external power is being supplied to the system's
power supply unit. This LED should normally be illuminated when the sys-
tem is operating.
l
HDD: Indicates IDE channel activity. On the SuperServer 7042P-8R,
this LED indicates CD-ROM drive activity when flashing.
l
NIC1:
Indicates network activity on LAN1 when flashing.
l
NIC2: Indicates network activity on LAN2 when flashing.
NIC1
NIC2
Summary of Contents for SuperServer 7042P-8R
