Supero SuperServer 6036T-3R, User Manual

Page: 52 / 102

5-20
S
UPER
S
ERVER 6036T-3R User's Manual
VGA Enable/Disable
JPG1 allows you to enable or disable
the VGA port. The default position is on
pins 1 and 2 to enable VGA. See the
table on the right for jumper settings.
VGA Enable/Disable
Jumper Settings (JPG1)
Jumper Setting Defi nition
Pins 1-2 Enabled
Pins 2-3 Disabled
LAN1/2 Enable/Disable
Change the setting of jumper JPL1 to
enable or disable the JLAN1 (LAN1
and LAN3) and JLAN2 (LAN2 and
LAN4) sets of Ethernet ports on the
serverboard. See the table on the right
for jumper settings. The default setting
is enabled.
JLAN1/2 Enable/Disable
Jumper Settings (JPL1/JPL2)
Jumper Setting Defi nition
Pins 1-2 Enabled
Pins 2-3 Disabled
I
2
C to PCI-X/PCI-E Slots
Jumper Settings (J12/J13)
Jumper Setting Defi nition
JI 2 C1: Closed JI 2 C2:Closed Enabled
JI 2 C1: Open JI 2 C2: Open Disabled
I
2
C Bus to PCI-X/PCI-Exp. Slots
Jumpers JI
2
C1 and JI
2
C2 allow you to
connect the System Management Bus
(I
2
C) to the PCI-Express slots. The
default setting is Open (Disabled.) Both
jumpers must be set to the same setting
See the table on the right for jumper
settings.
TPM Support Enable
JPT1 allows the user to enable TPM
(Trusted Platform Modules) support
to enhance data integrity and system
security. See the table on the right for
jumper settings. The default setting is
enabled.
TPM Support Enable
Jumper Settings
Jumper Setting Defi nition
1-2 Enabled
2-3 Disabled