Supero SuperServer 6036T-3R, User Manual

Page: 50 / 102

5-18
S
UPER
S
ERVER 6036T-3R User's Manual
Power Supply SMBus I 2 C Header
The power System Management Bus
(I 2 C) header is used to monitor the
status of the power supply, fan and
system temperature. See the table on
the right for pin defi nitions.
Power Supply SMBus I2C Header
Pin Defi nitions (J6)
Pin# Defi nition
1 Clock
2 Data
3 PWR Fail (Input from PS to MB)
4 Ground
5 +3.3V
Overheat LED/Fan Fail (JOH1)
The JOH1 header is used to connect
an LED to provide warning of chassis
overheating or fan failure. This LED
will blink to indicate a fan failure. Refer
to the tables on right for LED status
and pin defi nitions.
Overheat LED
Pin Defi nitions (JOH1)
Pin# Defi nition
1 5vDC
2 OH Active
OH/Fan Fail LED
States
State Message
Solid Overheat
Blinking Fan Fail
IPMB I
2
C Connector
A connector for the IPMI (Intelligent
Platform Management Interface) slot
is designated J5. Connect the appro-
priate cable here to utilize this man-
agement feature on your system.
IPMB Connector
Pin Defi nitions (J5)
Pin# Defi nition
1 Data
2 Ground
3 Clock
4 No Connection
I-Button
An onboard I-Button, located next to
the T-SGPIO1 header, is a computer
chip enclosed in a durable stainless
steel drum. The I-Button stores in-
structions, provides an electronic
interface and allows the HostRAID to
operate with Mega-RAID fi rmware.