Supero SuperServer 6033P-8R, User Manual

Page: 56 / 114

5-20
S
UPERSERVER 6033P-8R User’s Manual
Thermal Fan Enable/Disable
JP38 allows you to enable or disable
the thermal fan. When enabled, the
fan will operate continuously. When
disabled, it will operate only when a
predefined temperature threshold
has been exceeded. See the table
on the right for jumper settings.
Jumper
Position
Open
Closed
Definition
Disabled
Enabled
T hermal Fan
Enable/Disable
Jumper Settings (JP38)
SCSI Termination Enable/
Disable
Jumpers JPA1 and JPA2 allow you
to enable or disable termination for
t h e i n d i v i d u a l S C S I c h a n n e l s .
Jumper JPA1 controls SCSI channel
A and JPA2 controls SCSI channel
B. The normal (default) setting is
open to enable (teminate) both SCSI
channels. If you wish to connect
external SCSI devices, you should
d i s a b l e t e r m i n a t i o n f o r t h e
channnel(s) you will be connecting
them to. See the table on the right
for jumper settings.
Jumper
Position
Open
Closed
Definition
Enabled
Disabled
SCSI Channel T ermination
Enable/Disable
Jumper Settings
(JPA1, JPA2)
Watch Dog Enable/Disable
The Watch Dog jumper (located on
JP37) allows you to enable or disable
the Watch Dog feature. The default
position is open to disable the Watch
Dog timer. When enabled, Watch Dog
can reboot your PC if an application is
"hung up" or the system goes down.
See the table on the right for jumper
settings.
Jumper
Position
Open
Closed
Definition
Disabled
Enabled
W atch Dog T imer Enable/
Disable Jumper Settings
(JP37)