Supero SuperServer 6033P-8R, User Manual

Page: 3 / 114

Preface
About This Manual
This manual is written for professional system integrators and PC technicians.
It provides information for the installation and use of the SuperServer 6033P-8R.
Installation and maintainance should be performed by experienced technicians
only.
The SuperServer 6033P-8R is a high-end, dual Xeon processor redundant power
rackmount server based on the SC832S-R760 3U rackmount server chassis and
the X5DP8-G2 serverboard, which supports single or dual Xeon 604/603-pin pro-
cessors of up to 3.20 GHz (with a 1 MB integrated transfer cache) at a 533/400
MHz Front Side (System) Bus speed. Refer to the motherboard specifications
pages on our web site (http://www.supermicro.com/support/) for updates on sup-
ported processors.
Manual Organization
Chapter 1: Introduction
The first chapter provides a checklist of the main components included with the
server system and describes the main features of the SUPER X5DP8-G2
mainboard and the SC832S-R760 chassis, which make up the SuperServer
6033P-8R.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the SuperServer 6033P-8R
into a rack and check out the server configuration prior to powering up the
system. If your server was ordered without processor and memory components,
this chapter will refer you to the appropriate sections of the manual for their
installation.
Chapter 3: System Interface
Refer here for details on the system interface, which includes the functions
and information provided by the control panel on the chassis as well as
other LEDs located throughout the system.
iii
Preface