Supero SUPERSERVER 6018R-MT, User Manual

Page: 26 / 132

3-2
S
UPER
S
ERVER 6018R-MT/6018R-MTR User's Manual
3-3 Control Panel LEDs
The control panel located on the front of the SC813MFTQ-400CB/R400CB chassis
has five LEDs. These LEDs provide you with critical information related to different
parts of the system. This section explains what each LED indicates when illuminated
and any corrective action you may need to take.
2
1
Information LED
This LED will be solid blue when the UID function has been activated. When this
LED flashes red, it indicates a fan failure. When red continuously it indicates an
overheat condition, which may be caused by cables obstructing the airflow in the
system or the ambient room temperature being too warm. Check the routing of
the cables and make sure all fans are present and operating normally. You should
also check to make sure that the chassis covers are installed. Finally, verify that
the heatsinks are installed properly (see Chapter 5). This LED will remain flashing
or on as long as the indicated condition exists.
NIC2
Indicates network activity on LAN2 when flashing.
NIC1
Indicates network activity on LAN1 when flashing.
HDD
Channel activity for all HDDs. This light indicates hard drive activity on the 6018R-
MT/6018R-MTR when flashing.