Supero SUPERSERVER 6018R-MT, User Manual

Page: 106 / 132

7-24
SUPERSERVER 6018R-MT/6018R-MTR User's Manual
•
ME Firmware Status #2
•
Current State
•
Error Code

PCIe/PCI/PnP Configuration
The following PCI information will be displayed:
•
PCI Bus Driver Version
PCI Latency Timer
Use this item to configure the PCI latency timer for a device installed on a PCI bus.
Select 32 to set the PCI latency timer to 32 PCI clock cycles. The options are
32
,
64, 96, 128, 160, 192, 224 and 248 (PCI Bus Clocks).
PCI-X Latency Timer
Use this item to configure the PCI-X latency timer for a device installed on a PCI -X
bus. Select 32 to set the PCI-X latency timer to 32 PCI-X clock cycles. The options
are 32,
64 , 96, 128, 160, 192, 224 and 248 (PCI Bus Clocks).
VGA Palette Snoop
Select Enabled to support VGA palette register snooping which will allow a PCI
card that does not contain its own VGA color palette to examine a video card pal-
ette and mimic it for proper color display. The options are
Disabled and Enabled.
PCI AER (Advanced Error-Reporting) Support
Select Enabled to support Advanced Error-Reporting for onboard PCI devices. The
options are
Disabled and Enabled.
Above 4G Decoding (Available if the system supports 64-bit PCI decoding)
Select Enabled to decode a PCI device that supports 64-bit in the space above 4G
Address. The options are Enabled and
Disabled .
SR-IOV (Available if the system supports Single-Root Virtualization)
Select Enabled for Single-Root IO Virtualization support. The options are Enabled
and
Disabled.