Supero SUPERSERVER 6016T-MR, User Manual

Page: 75 / 106

Chapter 7: BIOS
7-5
Hit 'Del' Message Display
If this feature is set to Enabled, the message: "Press DEL to run Setup" will be
displayed during POST. The options are Enabled and Disabled.
Interrupt 19 Capture
Interrupt 19 is the software interrupt that handles the boot disk function. When this
item is set to Enabled, the ROM BIOS of the host adaptors will "capture" Interrupt
19 at boot and allow the drives that are attached to these host adaptors to function
as bootable disks. If this item is set to Disabled, the ROM BIOS of the host adap-
tors will not capture Interrupt 19, and the drives attached to these adaptors will not
function as bootable devices. The options are Enabled and Disabled.
Power Confi guration
Watch Dog Function
If enabled, the Watch Dog Timer will cause the system to reboot when it is inactive
for more than 5 minutes. The options are Enabled and Disabled.
Power Button Function
If this item is set to Instant_Off, the system will power off immediately as soon as
the user hits the power button. If set to 4_Second_Override, the system will power
off when the user presses the power button for 4 seconds or longer. The options
are Instant_Off and 4_Second_Override.
Restore on AC Power Loss
Use this feature to set the power state after a power outage. Select Power-Off for
the system power to remain off after a power loss. Select Power-On for the system
power to be turned on after a power loss. Select Last State to allow the system to
resume its last state before a power loss. The options are Power-On, Power-Off
and Last State .
Resume On RTC Alarm
Use this feature to set an event alarm using the Real Time Clock (RTC) to "wake
up" the system at specifi ed times. The options are Enabled and Disabled . If this
feature is enabled, the following items will display:
RTC Alarm Date (Days) (Available if Resume on RTC Alarm is Enabled)
This option appears if Resume On RTC Alarm is Enabled. The options are Every
Day and 1 ~ 31 (corresponding to the days of the month.)
RTC Alarm Time (Available if Resume on RTC Alarm is Enabled)
Set the time when the system wakes up during the day specifi ed under the RTC
Alarm Date above.