Supero SUPERSERVER 5027R-WRF User Manual Download Page 89

Page: 89 / 110

Chapter 7: BIOS

7-21

7-4 Chipset Confi guration Settings

Use the arrow keys to select Chipset and display the following submenu items.



North Bridge

This feature allows the user to confi gure the settings for the Intel North Bridge.



IOH (IO Hub) Confi guration



Intel

® VT for Directed I/O Confi guration

Intel VT-d

Select Enabled to enable Intel Virtualization Technology support for Direct

I/O VT-d by reporting the I/O device assignments to the VMM (Virtual

Working Memory) through the DMAR ACPI Tables. This feature offers fully-

protected I/O resource sharing across Intel platforms, providing greater reli-

ability, security and availability in networking and data-sharing. The options

are Enabled and

Disabled

Summary of Contents for SUPERSERVER 5027R-WRF















































































































Search results

Summary of Contents for SUPERSERVER 5027R-WRF

Reviews:

Related manuals for SUPERSERVER 5027R-WRF

Brands by name

Popular brands

Supero SUPERSERVER 5027R-WRF, User Manual

Search results

Summary of Contents for SUPERSERVER 5027R-WRF

Reviews:

Related manuals for SUPERSERVER 5027R-WRF

Brands by name

Popular brands