Supero SUPERSERVER 5027R-WRF, User Manual

Page: 62 / 110

6-2
S
UPER
S
ERVER 5027R-WRF User's Manual
Figure 6-1. Front and Rear Chassis Views
6-2 Control Panel
The control panel (located on the front of the chassis) must be connected to the
JF1 connector on the motherboard to provide you with system status indications. A
ribbon cable has bundled these wires together to simplify the connection. Connect
the cable from JF1 on the motherboard to the Control Panel PCB (printed circuit
board). Make sure the red wire plugs into pin 1 on both connectors. Pull all excess
cabling out of the airfl ow path. The LEDs inform you of system status.
See Chapter 3 for details on the LEDs and the control panel buttons. Details on
JF1 can be found in Chapter 5.
Control Panel 3.5" Drive Bays (2)
SATA Drives (8)
Ethernet Ports USB Ports
COM1 Port PCI Expansion Slots IPMI LAN
VGA Port
USB Ports