Supero SUPERSERVER 5027R-WRF, User Manual

Page: 56 / 110

5-26
S
UPER
S
ERVER 5027R-WRF User's Manual
5-11 SATA Ports
SATA Port Pin Defi nitions
(I-SATA0 ~ I-SATA5)
Pin # Defi nition
1 Ground
2 TXP
3 TXN
4 Ground
5 RXN
6 RXP
7 Ground
Rear Unit ID LED
The rear Unit ID LED (LE2) is located
on the back panel. This LED is used
in conjunction with the rear UID switch
to provide easy identifi cation of a sys-
tem that might be in need of service.
Rear UID
LED Indicator
Status Defi nition
Solid Blue UID Toggled On
Onboard Standby Power
LED Indicator
Status Defi nition
Off Power Supply is Off (Hard
Switch)
On Power Supply is On (Hard
Switch).
Onboard Standby Power LED
An onboard Standby Power LED
(LED2) indicates that the AC power
cable is connected and the power
supply switch is on. Make sure to
disconnect the power cable before
removing or installing non hot-swap
components.
SATA Ports
The X9SRW-F includes a total of 10
SATA ports. I-SATA0 ~ 5 on the moth-
erboard includes two SATA 3.0 ports
(I-SATA0 and I-SATA1, which have
white connector). An additional SATA
controller provides four more SATA
2.0 ports (S-SATA1 ~ 4).