Supero SUPERSERVER 5017R-WRF, User Manual

Page: 84 / 112

7-14
S
UPER
S
ERVER 5017R-WRF User's Manual
PCI Error Logging Support
Select Enabled to support error event logging for PCI Slots. The options are En-
abled and Disabled .
Poison Support
Select Enabled for Poison support. The options are Enabled and Disabled .

SATA Confi guration
When this submenu is slected, the AMI BIOS automatically detects the presence
of IDE or SATA devices and displays the following items.
SATA Port0~SATA Port5
The AMI BIOS displays the status of each SATA port as detected by the BIOS.
SATA Mode
Use this feature to confi gure SATA mode for a selected SATA port. The options are
Disabled, IDE Mode, AHCI Mode , and RAID Mode. The following are displayed
depending on your selection:
IDE Mode
The following items are displayed when IDE Mode is selected:
Serial-ATA (SATA) Controller 0~1
Use this feature to activate or dactivate the SATA controller, and set the
compatibility mode. The options for Controller 0 are Enhanced and Compat-
ible . The default setting for SATA Controller 1 is Enhanced .
AHCI Mode
The following items are displayed when the AHCI Mode is selected:
Aggressive Link Power Management
Select Enabled to enable Aggressive Link Power Management to support
Cougar Point B0 stepping and beyond. The options are Enabled and
Disabled.
Port 0~Port 5 Hot Plug
Select Enabled to enable hot-plug support for a port specifi ed by the user
so that the user is allowed to change a hardware component or a device
without shutting down the system. The options are Enabled and Disabled .