Supero SUPERSERVER 5017C-LF, User Manual

Page: 34 / 92

5-4
S
UPER
S
ERVER 5017C-LF User's Manual
CPU properly
installed
Load lever locked
into place.
Warning: The CPU will only seat inside the socket in one direction. Make
sure it is properly inserted before closing the load plate. If it doesn't close
properly, do not force it as it may damage your CPU. Instead, open the load
plate again and double-check that the CPU is aligned properly.
!
Installing a Passive CPU Heatsink
Do not apply any thermal grease to the heatsink or the CPU die -- the re- 1.
quired amount has already been applied.
Place the heatsink on top of the CPU so that the four mounting holes are 2.
aligned with those on the motherboard and the heatsink bracket underneath.
Screw in two diagonal screws (i.e., the #1 and the #2 screws) until just snug 3.
(do not over-tighten the screws to avoid possible damage to the CPU.)
Finish the installation by fully tightening all four screws. 4.
Removing the Heatsink
Warning: We do not recommend removing the CPU or the heatsink. How-
ever, if you do need to remove the heatsink, please follow the instructions
below to prevent damage to the CPU or other components.
Unscrew the heatsink screws from the motherboard in the sequence as 1.
shown in the illustration below.
Gently 2. wriggle the heatsink to loosen it from the CPU (do not use excessive
force).
!