Supero SUPERSERVER 5017C-LF, User Manual

Page: 21 / 92

Chapter 2: Server Installation
2-7
2-6 Checking the Drive Bay Setup
Checking the Drives
For servicing the hard drive, you will need to remove the top chassis cover. 1.
The SATA disk drive is located at the front of the chassis' interior.
If you need to install a SATA hard drive, please refer to the appropriate sec- 2.
tion in Chapter 6.
Checking the Airfl ow
Airfl ow is provided by two 4-cm fans. The system component layout was care- 1.
fully designed to promote suffi cient airfl ow through the small 1U rackmount
space.
Also note that all power and data cables have been routed in such a way that 2.
they do not block the airfl ow generated by the fan.
Providing Power
The last thing you must do is to provide input power to the system. Plug the 1.
power cord from the power supply unit into a high-quality power strip that of-
fers protection from electrical noise and power surges. It is recommended that
you use an uninterruptible power supply (UPS).
Finish by pushing the power button on the control panel to power up the 2.
system.