Supero SUPERSERVER 5017A-EF, User Manual

Page: 82 / 102

7-10
S
UPER
S
ERVER 5017A-EF User's Manual
will keep USB devices available only for EFI applications. The options are
Enabled
, Disabled, and Auto.
USB 3.0 Support
Use this feature to enable or disable the USB 3.0 (XHCI) Controller support.
The options are
Enabled
and Disabled.
XHCI Hand-Off
This item is for Operating Systems that do not support Enhanced Host Con-
troller Interface (EXCI) hand-off. When enabled, XHCI ownership change
will be claimed by the EHCI driver. The settings are
Enabled
and Disabled.
USB Mass Storage Driver Support
Use this feature to enable or disable the USB Mass Storage Driver support.
The options are
Enabled
and Disabled.

PCIe/PCI/PnP Confi guration
This feature allows the user to set the PCI/PnP con fi gurations for the following items:
Launch Storage OpROM Policy
In case of multiple Option ROMs (Legacy and EFI-compatible), this feature speci fi es
what ROM to launch. The options are
Legacy Only
and UEFI Only.
Launch Video OpROM Policy
In case of multiple Option ROMs (Legacy and EFI-compatible), this feature speci fi es
what ROM to launch. The options are
Legacy Only
and UEFI Only.
PCI Latency Timer
This feature sets the latency Timer of each PCI device installed on a PCI bus. Se-
lect 64 to set the PCI latency to 64 PCI clock cycles. The options are 32 PCI Bus
Clocks,
64 PCI Bus Clocks
, 96 PCI Bus Clocks, 128 PCI Bus Clocks, 160 PCI
Bus Clocks, 192 PCI Bus Clocks, 224 PCI Bus Clocks and 248 PCI Bus Clocks.
PERR# Generation
Set this item to Enabled to allow PCI devices to generate PERR# error codes. The
options are Enabled and
Disabled
.
SERR# Generation
Set this item to Enabled to allow PCI devices to generate SERR# error codes. The
options are Enabled and
Disabled
.