Supero SUPERSERVER 5014C-MT, User Manual

Page: 71 / 112

Chapter 7: BIOS
7-3
Date/Time
Set the system date and time. Key in the correct information in the "mm", "dd"
and "yy" fi elds. Press the "Enter" key to save the data.
Legacy Diskette A/Legacy Diskette B
This setting allows the user to set the type of fl oppy disk drive installed as diskette
A and diskette B. The options are None, 360Kb 5.25 in, 1.2MB 5.25 in, 720Kb 3.5
in, 1.44/1.25MB , 3.5 in and 2.88MB 3.5 in.
Swap Floppy Drive
If the system has two fl oppy drives, enable this feature to assign physical drive
B to logical drive A or physical drive A to logic drive B. The options are Enabled
and Disabled .
IDE Channel 0 Master/Slave, IDE Channel 1 Master/Slave, IDE
Channel 2 Master/Slave, IDE Channel 3 Master/Slave
These settings allow the user to set the parameters of the IDE Channel 0 Master/
Slave to IDE Channel 3 Master/Slave slots. Hit <Enter> to activate the following
sub-menu screen for detailed options of these items. Set the correct confi gurations
accordingly. The items included in the submenu are: