Supero SUPERSERVER 5014C-MT, User Manual

Page: 12 / 112

1-2
S
UPER
S
ERVER 5014C-MT User's Manual
1-2 Motherboard Features
At the heart of the SuperServer 5014C-MT lies the P8SCT, a single processor
motherboard based on Intel's E7221 chipset and designed to provide maximum
performance. Below are the main features of the P8SCT.
Processors
The P8SCT supports a single Intel
®
Pentium
®
4 processor or a single Intel Celeron
533 MHz FSB processor in an LGA775 socket. Please refer to our web site for a
complete listing of supported processors (www.supermicro.com).
Memory
The P8SCT has four (4) 240-pin DIMM sockets that can support up to 4 GB of
unbuffered ECC or non-ECC DDR2-533/400 SDRAM modules. The memory bus
is a dual-channel confi guration and memory modules must be installed in pairs (two
at a time). All memory modules used to populate the system should be the same
size, type and speed.
Serial ATA
The ICH6R South Bridge of the chipset includes a Serial ATA controller that sup-
ports a four-port SATA subsystem (RAID 0, 1 and 10 supported). The Serial ATA
drives are hot-swappable units.
Note: The operating system you use must have RAID support to enable the hot-
swap capability and RAID function of the Serial ATA drives.
PCI Expansion Slots
The P8SCT has one 64-bit, 133 MHz (3.3V) PCI-X slot and fi ve 32-bit, 33 MHz (5V)
PCI slots. When confi gured as the 5014CM-T, the 64-bit, 133 MHz PCI-X slot is
available with the use of a riser card (included with the system).
Ethernet Ports
The P8SCT has two onboard Broadcom BCM5721 controllers to support two Gigabit
LAN ports. (Supports 100/1000BASE-T, RJ45 output.)