Supero SUPERSERVER 5014C-MT, User Manual

Page: 54 / 112

5-18
S
UPER
S
ERVER 5014C-MT User's Manual
System Power Force On
Jumper JPF allows you to enable or
disable the Force-Power-On function.
If enabled, system power will always
stay on. If disabled (the normal set-
ting), the user needs to press the power
button to power on the system.
USB Wake-Up
JPUSB1 and JPUSB2 are used to en-
able or disable USB Wake-Up, which
allows you to wakeup the system by
depressing a key on the keyboard or
by clicking the mouse when either is
connected to a USB port. JPUSB1 is
for the USB1/2 ports and JPUSB2 is
for the USB3/4 and USB5/6 headers.
Enable the jumper to allow the system
to be woken up from an S1 or S3 state
in Windows OS. See the table on the
right for jumper settings. The default
setting is disabled.
Keyboard Wake-Up
The JPWAKE1 jumper is used to al-
low the system to be woken up by
depressing a key on the keyboard
from an S1 or S3 state in Windows
OS. See the table on the right for
jumper settings. Your power supply
must meet ATX specifi cation 2.01 or
higher and supply 720 mA of standby
power to use this feature.
USB Wake-Up
Jumper Settings
(JPUSB1/2)
Jumper Setting Defi nition
Pins 1-2 Enabled
Pins 2-3 Disabled
Keyboard Wake-Up
Jumper Settings
(JPWAKE1)
Jumper Setting Defi nition
Pins 1-2 Disabled
Pins 2-3 Enabled
System Power Force On
Jumper Settings
(JPF)
Jumper Setting Defi nition
Closed Force On
Open Disabled