Supero SuperServer 5013S-8, User Manual

Page: 56 / 110

5-22
S
UPER
S
ERVER 5013S-8/5013S-i Manual
Fan Status Select
JP15 allows you to change the sta-
tus of the Overheat/Chassis fan to
either activate only during an over-
heat condition (set in BIOS) or to
reamin active at all times. The de-
fault position is open. See the table
on the right for jumper settings.
Jum per
Position
Open
Closed
Definition
Overheat
Alw ays On
Fan Status Select
Jumper Settings (JP15)
VGA Enable/Disable
JP9 allows you to enable or dis-
able the VGA port. The default
position is on pins 1 and 2 to en-
able VGA. See the table on the
right for jumper settings.
Jum per
Position
1-2
2-3
Definition
Enabled
Disabled
VGA Enable/Disable
Jumper Settings
(JP9)
Watch Dog Enable/Disable
JP19 is used to enable or disable
the Watch Dog function. This
jumper is used together with the
W a t c h D o g e n a b l e f u n c t i o n i n
BIOS. Enable both the jumper and
the BIOS setting to use the Watch
Dog feature. See the table on the
right for pin definitions.
Jumper
Position
Open
Closed
Definition
Disabled
Enabled
W atch Dog Enable/
Disable
Jumper Settings (JP19)
Mb LAN Enable/Disable
Change the setting of jumper JP10
to enable or disable the Mb LAN
port on the motherboard. See the
table on the right for jumper set-
tings. The default setting is pins
1-2.
Jum per
Position
Pins 1-2
Pins 2-3
Definition
Enabled
Disabled
M b LAN
Enable/Disable
Jumper Settings
(JP10)