Supero SuperServer 5013C-M, User Manual

Page: 61 / 96

Chapter 6: Advanced Chassis Setup
6-3
6-3 System Fans
One 10-cm blower fan provides the cooling for the SuperServer 5013C-M. The
chassis includes air seals under the blower fans and at the chassis cross sec-
tion, which separates the drive bay area from the motherboard area of the chassis
to promote better airflow. It is highly important that the air seal is properly
installed and making a good seal in order for the cooling air to circulate properly
through the chassis.
System Fan Failure
The blower fan runs at a full 100% rpm. If this fan fails, you will need to have it
replaced with the same type. Contact your vendor or Supermicro for information
on replacement fans.
cabling out of the airflow path. The LEDs inform you of system status. See
Chapter 3 for details on the LEDs and the control panel buttons. Details on
JF1 can be found in Chapter 5.
Figure 6-3. Replacing the System Cooling Fan