Supero SUPERSERVER 1028U Series, User Manual

Page: 80 / 120

6-10
SUPERSERVER 1028U Series Series User's Manual
Figure 6-9. Installing the Air Shroud
Installing the Air Shroud
1. Position the air shroud in the chassis as illustrated in Figure 6-9.
2. Align the notch on the air shroud with the pin on the expansion card bracket.
3. Slide the pin into the back of the notch.
4. Lower the front of the air shroud over the fan tray, sliding the front notches over
the pins on the fan tray.
Installing the Air Shroud
Air shrouds concentrate airflow to maximize fan efficiency. The serverboard air
shroud does not require screws to install.
Shroud