Supero SUPERSERVER 1028U Series, User Manual

Page: 106 / 120

7-24
SuperServer 1028U Series User’s Manual
Flow Control
This item allows the user to set the flow control for Console Redirection to
prevent data loss caused by buffer overflow. Send a "Stop" signal to stop sending
data when the receiving buffer is full. Send a "Start" signal to start sending data
when the receiving buffer is empty. The options are
None, Hardware RTS/CTS,
and Software Xon/Xoff.
Data Bits, Parity, Stop Bits
The setting for each of these features is displayed.

ACPI Settings
Use this feature to configure Advanced Configuration and Power Interface (ACPI)
power management settings for your system.
WHEA Support
This item enables Windows Hardware Error Architecture to help determine the root
cause of hardware errors. The options are
Enabled and Disabled.
High Precision Event Timer
This setting allows you to activate the High Precision Event Timer that produces
periodic interrupts at a much higher frequency than a real-time clock does in
synchronizing multimedia streams, providing smooth playback, reducing the
dependency on other timestamp calculation devices, such as an x86 RDTSC
Instruction embedded in the CPU. The High Precision Event Timer is used to replace
the 8254 Programmable Interval Timer. The options are
Enabled and Disabled.
NUMA (NON-Uniform Memory Access)
This feature enables the Non-Uniform Memory Access ACPI support. The options
are
Enabled and Disabled.
PCI AER Support
This setting allows the ACPI OS to natively manage PCI Advanced Error Reporting.
Options are
Disabled and Enabled.