Supero SUPERSERVER 1027GR-TRF, User Manual

Page: 56 / 109

Chapter 5: Advanced Serverboard Setup
5-23
5-10 Onboard Indicators
LAN1/2 Port LEDs
The Ethernet ports have two LEDs. On
each port, one LED indicates activity while
the other LED may be green, amber or
off to indicate the speed of the connec-
tion. See the table on the right for the
functions associated with the connection
speed LED.
Note:
the dedicated IPMI LAN does not
operate at 1 Gb/s.
Onboard Power LED
An Onboard Power LED is located at
LE1. This LED Indicator is on when the
system is on. Be sure to unplug the AC
power cable before removing or adding any
components. See the table on the right for
more details.
Onboard PWR LED Indicator
LED Color De fi nition
Off System Off (power cable
not connected)
Green System On
Green:
Flashing
Quickly ACPI S1 State
BMC Enable/Disable
Jumper Settings
Both Jumpers De fi nition
Pins 1-2 Enabled
Pins 2-3 Disabled
BMC Enable/Disable
Use jumper JPB1 to enable or disable the
BMC (Baseboard Management Controller),
which supports IPMI 2.0/KVM. See the
table on the right for jumper settings.
Dedicated IPMI LAN Port LEDs
A dedicated IPMI LAN port is also located
on the I/O backplane. The amber LED on
the right indicates activity, while the green
LED on the left indicates the speed of the
connection. Please note that the IPMI LAN
does not support 1Gbps connections. See
the table at right for more information.
IPMI LAN LEDs
Color/State De fi nition
Link (Left) Green: Solid 100 Mbps
Activity (Right) Amber: Blinking Active
LAN Port LEDs
(Connection Speed Indicator)
LED Color 1 Gb Ports 10 Gb Ports
Off NC or 10 Mb/s 10/100 Mb/Off
Green 100 Mb/s 10 Gb/s
Amber 1 Gb/s 1 Gb/s