Supero SUPERSERVER 1027GR-TRF, User Manual

Page: 11 / 109

1-2
S
UPER
S
ERVER 1027GR-TRF/1027GR-TRFT User's Manual
1-2 Serverboard Features
At the heart of the SuperServer 1027GR-TRF/1027GR-TRFT server is the X9DRG-
HF/X9DRG-HTF, a dual processor serverboard based on the Intel C602 chipset.
Below are the main features of the X9DRG-HF/X9DRG-HTF. (See Figure 1-1 for a
block diagram of the chipset).
Processors
The X9DRG-HF/X9DRG-HTF supports two Intel Xeon E5-2600 series processors in
LGA 2011 sockets (Socket R). Please refer to the serverboard description pages on
our web site for a complete listing of supported processors (www.supermicro.com).
Memory
The X9DRG-HF/X9DRG-HTF has eight DIMM slots that can support up to 256 GB
of registered ECC DDR3-1600/1333/1066/800 MHz RDIMMs. Modules of the same
size and speed are recommended. See Chapter 5 for details.
Serial ATA
A SATA controller is integrated into the chipset to provide a 4-port SATA subsystem,
which is RAID 0, 1, 5 and 10 supported. Two of these are SATA 3.0 ports and two
are SATA 2.0 ports. The SATA drives are hot-swappable units.
Note:
The operating system you use must have RAID support to enable the hot-
swap capability and RAID function of the SATA drives.
PCI Expansion Slots
The X9DRG-HF/X9DRG-HTF has three PCI-Express 3.0 x16 slots to support
three double-width GPU cards. Additional slots support one PCI-Express 3.0 x8
low-pro
fi le card.
Onboard Controllers/Ports
The color-coded I/O ports include one COM port (an additional COM header is lo-
cated on the serverboard), a VGA (monitor) port, two USB 2.0 ports, two Gb Ethernet
LAN ports (two 10 Gb ports on the X9DRG-HTF) and one dedicated IPMI LAN port.
IPMI
IPMI (Intelligent Platform Management Interface) is a hardware-level interface speci-
fi cation that provides remote access, monitoring and administration for Supermicro