Supero SUPERSERVER 1027GR-TRF, User Manual

Page: 43 / 109

5-10
S
UPER
S
ERVER 1027GR-TRF/1027GR-TRFT User's Manual
Processor/DIMM Population Confi gurations
For memory to work properly, follow the tables below for memory installation.
•
For memory to operate properly, please install DIMMs in pairs (have an even
number of DIMMs installed).
•
All channels in a system will run at the fastest common frequency.
Processors and their Corresponding
DIMMs
CPU# Corresponding DIMM Modules
CPU 1
P1-A1 P1-B1 P1-C1 P1-D1
CPU2
P2-E1 P2-F1 P2-G1 P2-H1
Populating DIMMs
Number of
CPUs+DIMMs
CPU and DIMM Population Confi guration Table
(For memory to work proper, please install DIMMs in pairs)
1 CPU &
2 DIMMs
CPU1
P1-A1/P1-B1
1 CPU &
4 DIMMs
CPU1
P1-A1/P1-B1, P1-C1/P1-D1
2 CPUs &
4 DIMMs
CPU1 + CPU2
P1-A1/P1-B1, P2-E1/P2-F1
2 CPUs &
6 DIMMs
CPU1 + CPU2
P1-A1/P1-B1/P1-C1/P1-D1, P2-E1/P2-F1
2 CPUs &
8 DIMMs
CPU1 + CPU2
P1-A1/P1-B1/P1-C1/P1-D1, P2-E1/P2-F1/P2-G1/P2-H1
RDIMM Support POR
DIMM
Slots per
Channel
DIMMs
Popu-
lated
per DDR
Channel
RDIMM Type
(RDIMM = Regis-
tered DIMMs)
POR Speeds (in MHz) Ranks per DIMM
(Any Combination)
1 1 Reg. ECC DDR3 800/1066/1333/1600 SR, DR, or QR
2 1 Reg. ECC DDR3 800/1066/1333/1600 SR, DR, or QR
2 2 Reg. ECC DDR3 800/1066/1333/1600 Mixing SR, DR, QR
Population Rules:
1. Any combination of x4 and x8 RDIMMs with 1 Gb or 2 Gb DRAM density are supported.
2. Populate DIMMs starting with DIMM A1.
3. When mixing QR with SR or DR on the same DDR channel, put the QR in DIMMA1
fi rst.