Supero SUPERSERVER 1026T-UF, User Manual

Page: 66 / 118

5-16
S
UPER
S
ERVER 1026T-URF/1026T-UF User's Manual
Fan Headers
The X8DTU-F has eight headers,
designated Fan1 through Fan8. FAN1
through FAN6 are for chassis/system
fans while FAN7 and FAN8 are used
to CPU heatsink fans. Their speed is
controlled via Thermal Management
with a BIOS setting. See the table on
the right for pin defi nitions.
Serial Ports
The COM1 serial port is located on
the IO backplane. COM2 is a header
on the serverboard (see serverboard
layout for location). See the table on
the right for pin defi nitions.
Note: Pin 10 is included on the header but not on
the port. NC indicates no connection.
Serial Port Pin Defi nitions
(COM1, COM2)
Pin # Defi nition Pin # Defi nition
1 DCD 6 DSR
2 RXD 7 RTS
3 TXD 8 CTS
4 DTR 9 RI
5 Ground 10 NC
Fan Header
Pin Defi nitions
(FAN1-8)
Pin# Defi nition
1 Ground (Black)
2 +12V (Red)
3 Tachometer
4 PWM Control
Universal Serial Bus Headers
Four additional USB headers (USB2/3
and USB4/5) are included on the
serverboard. These may be used for
front side access. A USB cable (not
included) is needed for the connec-
tion. See the table on the right for pin
defi nitions.
Universal Serial Bus Headers
Pin Defi nitions (USB2/3, USB4/5)
USB2, USB4
Pin # Defi nition
USB3, USB5
Pin # Defi nition
1 +5V 1 +5V
2 PO- 2 PO-
3 PO+ 3 PO+
4 Ground 4 Ground
5 Key 5 NC
Chassis Intrusion
A Chassis Intrusion header is located
at JL1. Attach the appropriate cable to
inform you of a chassis intrusion.
Chassis Intrusion
Pin Defi nitions (JL1)
Pin# Defi nition
1 Intrusion Input
2 Ground