Supero Supero X9SAE, User Manual

Page: 84 / 105

4-14
X9SAE Motherboard Series User’s Manual

Serial Port Console Redirection
COM1/COM2 Console Redirection
Use this feature to enable console redirection for COM1 and COM2 ports. The op-
tions are Enabled and
Disabled .
 Console Redirection Settings
Configure the following options for the Console Redirection Settings. The
most common settings are set as default:
Terminal Type : Select ANSI, VT100, VT100+ , or VT-UTF8
Bits per Second (BPS): 9600, 19200, 38400, 57600, or 115200
Data Bits: 8 or 7
Parity: None , Even, Odd, Mark, or Space
Stop Bits: 1 or 2
Flow Control: None or Hardware RTS/CTS
VT-UTF8 Combo Key Support: Enabled or Disabled
Recorder Mode: Disabled or Enabled
Resolution 100x31:
Enabled
or Disabled
Legacy OS Redirection Resolution: 80x25 or 80x24
puTTY Keypad: VT100 , LINUX, XTERM6, SCO,ESCN, VT400
Serial Port for Out-of-Band Management/
Windows Emergency Management Services (EMS)
Use this feature to enable console redirection for Serial Port for Out-of-Band Man-
agement and Windows Emergency Management Services (EMS). The options are
Enabled and
Disabled .
 Console Redirection Settings
Configure the following options for the Console Redirection Settings. The
most common settings are set as default:
Out-of-Band Mgmt Port: COM1 , COM2, COM3 (PCI, Bus0, Dev0, Func0)
Terminal Type : Select ANSI, VT100, VT100+, or VT-UTF8
Bits per Second (BPS): 9600, 19200, 57600, or 115200
Data Bits: 8 or 7
Parity: None , Even, Odd, Mark, or Space
Stop Bits: 1 or 2