Chapter 5: AMI BIOS
5-17
Serial Port Number
This feature allows the user decide which serial port to be used for Console Redi-
rection. The options are COM 1
and
COM 2
.
Base Address, IRQ
This item displays the based address and IRQ of the serial port specifi ed
above.
Serial Port Mode
This feature allows the user to set the serial port mode for Console Redirection.
The options are
115200 8, n 1
; 57600 8, n, 1; 38400 8, n, 1; 19200 8, n, 1; and
9600 8, n, 1.
Flow Control
This feature allows the user to set the fl ow control for Console Redirection. The
options are
None
, Hardware, and Software.
Redirection After BIOS POST
Select Disabled to turn off Console Redirection after Power-On Self-Test (POST).
Select Always to keep Console Redirection active all the time after POST. (Note:
This setting may not be supported by some operating systems.) Select Boot Loader
to keep Console Redirection active during POST and Boot Loader. The options
are Disabled, Boot Loader, and
Always
.
Terminal Type
This feature allows the user to select the target terminal type for Console Redirec-
tion. The options are
ANSI,
VT100
, and VT-UTF8.
VT-UTF8 Combo Key Support
A terminal keyboard defi nition that provides a way to send commands from a remote
console. Available options are
Enabled
and Disabled.
Sredir Memory Display Delay
This feature defi nes the length of time in seconds to display memory information.
The options are
No Delay,
Delay 1 Sec, Delay 2 Sec, and Delay 4 Sec.
Hardware Health
Monitor
This feature allows the user to monitor system health and review the status of each
item as displayed.
Summary of Contents for Supero X8DTU-6F+
Page 1: ...USER S MANUAL Revision 1 0a X8DTU 6F X8DTU 6TF X8DTU 6F LR X8DTU 6TF LR ...
Page 104: ...5 30 X8DTU 6F X8DTU 6TF X8DTU 6 T F LR Motherboard User s Manual Notes ...
Page 106: ...A 2 X8DTU 6F X8DTU 6TF X8DTU 6 T F LR User s Manual Notes ...
Page 110: ...B 4 X8DTU 6F X8DTU 6TF X8DTU 6 T F LR User s Manual Notes ...
