Supero Supero SuperServer 5037C-T, User Manual

Page: 58 / 90

6-6
S
UPER
S
ERVER 5037C-T User's Manual
Figure 6-5. Removing the 2.5" Hard Drives
1
4
1
5
Thumb Screw
5. If a hard drive is already present, remove it by carefully pulling the sides of
the hard drive carrier outward.
6. Remove the hard drive from the hard drive carrier.
7. Insert the new hard drive into the hard drive carrier.
8. Insert the hard drive carrier into the hard drive cage, sliding it towards the
back of the the hard drive cage until it clicks into a locked position.
9. Slide the 2.5" hard drive cage back into the chassis and tighten the thumb
screw to secure the cage.
10. Connect the related cables to the hard drive