Supero Supero SUPERSERVER 5017A-EP, User Manual

Page: 60 / 102

5-16
S
UPER
S
ERVER 5017A-EP User's Manual
Audio Enable
Jumper Settings
Jumper Setting Defi nition
1-2 Enabled (Default)
2-3 Disabled
Onboard Audio Enable
JPAC1 allows the fl exibility of enabling
or disabling the on board audio. Please
see the table on the right for the jumper
settings.
LVDS Voltage Select
Jumper Settings
Jumper Setting Defi nition
1-2 5 Volts
2-3 3.3 Volts (Default)
LVDS Voltage Select
Jumper JLCDVCC1 allows output volt-
age selection (5V or 3.3V) for the LVDS
port on the motherboard.
USB Wake-Up
Use the JPUSB1 jumper to enable
system "wake-up" via a USB device.
This jumper allows you to "wake-up"
the system by pressing a key on the
USB keyboard or by clicking the USB
mouse of your system. The JPUSB1
jumper is used together with the USB
Wake-Up function in the BIOS. Enable
both the jumper and the BIOS setting
to activate this function. See the table
on the right for jumper settings and
jumper connections.
Note : The default jumper setting is
"Enabled". When the "USB Wake-Up"
function is enabled, it will be active on
all USB ports.
USB Wake-Up
Jumper Settings
Jumper Setting Defi nition
Pins 1-2 Enabled (Default)
Pins 2-3 Disabled