Supero Supero SUPERSERVER 5017A-EP, User Manual

Page: 53 / 102

Chapter 5: Advanced Motherboard Setup
5-9
NIC1/NIC2 LED Indicators
The NIC (Network Interface Controller
or Ethernet Controller) LED connec-
tion for LAN port 1 is located on pins
11 and 12 of JF1, and the LED con-
nection for LAN Port 2 is on Pins 9
and 10. Attach the NIC LED cables to
display network activity. Refer to the
table on the right for pin defi nitions.
NIC 1/2 LED
Pin Defi nitions (JF1)
Pin# Defi nition
11/9 Vcc
12/10 Ground
HDD LED
The HDD LED connection is located
on pins 13 and 14 of JF1. Attach a
hard drive LED cable here to display
disk activity (for any hard drive ac-
tivities on the system, including Serial
ATA and IDE). See the table on the
right for pin defi nitions.
HDD LED
Pin Defi nitions (JF1)
Pin# Defi nition
13 +3.3V
14 HD Active
Power LED
The Power LED connection is located
on pins 15 and 16 of JF1. Refer to the
table on the right for pin defi nitions.
Power LED
Pin Defi nitions (JF1)
Pin# Defi nition
15 +3.3V
16 Ground
LAN Ports (LAN1/LAN2)
Two gigabit LAN ports are located
on the I/O back panel. These ports
accept RJ45 type cables. These are
used to connect the motherboard to
a network.
RJ45/LAN
Pin Defi nitions
Pin # Defi nition Pin # Defi nition
1 TX_D1+ 5 BI_D3-
2 TX_D1- 6 RX_D2-
3 RX_D2+ 7 BI_D4+
4 BI_D3+ 8 BI_D4-