4-8
C2G41
User’s Manual
Advanced Chipset Settings
The items included in the Advanced Settings submenu are listed below:
NorthBridge Configuration
This feature allows the user to configure the settings for the Intel 945GME
NorthBridge chipset.
Memory Remap Feature
PCI memory resources will overlap with the total physical memory if 4GB of
memory or above is installed on the motherboard. When this occurs,
Enable
this
function to reallocate the overlapped physical memory to a location above the
total physical memory to resolve the memory overlapping situation. The options
are
Enabled
and Disabled.
PCI MMIO Allocation
Use this feature to assign the address for PCI Memory-mapped IO (MMIO)
allocation. The Default setting is
4 GB to 3072 MB
.
DRAM Frequency
This feature allows the user to select the DRAM Frequency setting. The options
are
Auto
(Auto-detect), 800 MHz and 1067 MHz
Configure DRAM Timing by SPD
Select Enable to allow the BIOS to read the SPD (Serial Presence Detect) chip
which is built in the memory module in order to get the exact memory specifica
-
tions. The options are
Enabled
and Disabled.
Memory Hole
Use the feature to allocate memory resource reserved for use of PCI devices. If
set to 15 MB~16MB, the reserved memory will be placed in the location around
15 MB~16 MB. The options are
Disabled
and 15 MB~ 16 MB.
Boot Graphics Adapter Priority
Use this feature to select the graphics controller to be used as the primary boot
device. The options are IGD, PCI/IGD, PCI/PEG, PEG/IGD, and
PEG/PCI
. See
below for an explanation of the acronyms. For example, if PEG/PCI is selected,
the system will look for a PCI-E graphics (PEG) adapter first, if none is found
then it uses the PCI graphics (PCI) adapter to boot.
Summary of Contents for Supero C2G41
