Supero Supero C2G41, User Manual

Page: 67 / 93

Chapter 4: AMI BIOS
4-7
and Disabled. Note : If there is any change to this setting, you will need to power
off and restart the system for the change to take effect. Please refer to Intel’s web
site for detailed information.
Execute Disable Bit (Available when supported by the OS and the CPU)
Set to Enabled to enable the Execute Disable Bit to allow the processor to classify
areas in the system memory where an application code can execute and where
it cannot, thus preventing a worm or a virus from creating a flood of codes to
overwhelm the processor or damage the system during an attack. The default is
Enabled . (Refer to Intel and Microsoft Web Sites for more information.)
Core-Multi-Processing (Available when supported by the CPU)
Set to Enabled to use a processor's Second Core and beyond. (Please refer to Intel's
web site for more information.) The options are Disabled and
Enabled .
PECI
Select Enabled to activate the processor's Platform Environment Control Interface
(PECI) feature. PECI uses the processor's Digital Thermal Sensor (DTS) to man-
age thermal conditions. Please see the item
CPU Overheat Alarm under Hard-
ware Health Configuration later in this section for more information. The options
are Enabled and Disabled.
Intel® Speed Step TM Technology (Available when supported by the CPU)
Select Enabled to use the Enhanced Intel SpeedStep Technology and allow the
system to automatically adjust the processor voltage and core frequency in an ef-
fort to reduce power consumption and heat dissipation. The options are
Enabled
and Disable.
Intel® C-State Technology (Available when supported by the CPU)
Select Enabled to use the Intel C-State Technology and allow the BIOS to automati-
cally set the system power to C2/C3/C4 State in an effort to reduce power consump-
tion and heat dissipation. The options are
Enabled and Disabled.
C1E Support
Select Enabled to use the "Enhanced Halt State" feature. C1E significantly reduces
the CPU's power consumption by reducing the CPU's clock cycle and voltage during
a "Halt State." The options are Disabled and
Enabled .