Supero SUPER P6DLE, User Manual

Page: 33 / 66

2-1
Chapter 2: Installation
Chapter 2
Installation
2-1 Pentium II Processor Installation
1. Check the Intel boxed processor kit for the following items: the
processor with the fan heatsink attached, two black plastic pegs,
two black plastic supports, and one power cable.
2. Install the retention mechanism attach mount under the
motherboard. Do this before mounting the motherboard into the
chassis. Do not screw too tight. Mount the two black plastic pegs
onto the motherboard (Figure 2.1). These pegs will be used to
attach the fan heatsink supports. Notice that one hole and the base
of one peg are larger than the other hole and peg base. Push each
peg into its hole firmly until you hear it "click" into place.
Figure 2-1. Mounting the Pegs
Retention
Mechanism
Large peg and hole