4-10
S
UPER i2DML-8G2/i2DML-iG2
User’s Manual
!
Peripheral Device Configuration
This feature allows the user to configure Peripheral Device settings
Power Loss Control
This setting allows you to choose how the system will react when
power returns after an unexpected loss of power. Options are "Stay
Off", "Power On" and "
Last State
."
Watch Dog Timer
This setting is used to enable or disabled the Watch Dog Timer function. It
must be used in conjunction with the J31 jumper (see Chapter 2 for details).
Options are "Enabled" and "
Disabled
."
SCSI & PCI Slot1 Frequency
This setting allows the user to set the maximum PCI bus speed for the
slot specified. Options are "PCI 33MHz", "PCI 66MHz", "PCIX 66MHz",
"PCIX 100MHz", "PCIX 133MHz" and "
Auto
." (*If set to "Auto", the
maximum bus speed will be decided by the AMI BIOS based on the
capability of the device of the bus.)
(*Note:
Watch Dog is for OEM use only. WD sets a timer and it will
reset after the time specified expired. ACustom code must be written to
stop this function if WD is set to "enabled" in the BIOS and via a jumper
on board.)
