Chapter 4: BIOS
4-15
BIOS
Post Video on S3 Resume
This determines whether or not to invoke the VGA BIOS post when
resuming from STR/S3. The settings for this option are
Enabled
and
Disabled
. Available with ACPI only.
Reset IDE on S3 Resume
This determines whether or not to reset IDE when resuming from STR/S3.
The settings for this option are
Enabled
and
Disabled
. Available with
ACPI only.
PCI/Plug and Play Setup
Plug and Play-Aware OS
The settings for this option are
No
or
Yes
. Set this option to
Yes
if the
operating system in the computer is aware of and follows the Plug and Play
specification. AMIBIOS only detects and enables PnP ISA adapter cards
that are required for system boot. Currently, only Windows 95 is PnP-
Aware. Set this option to
No
if the operating system (such as DOS, OS/
2, Windows 3.x) does not use PnP. You must set this option correctly.
Otherwise, PnP-aware adapter cards installed in the computer will not be
configured properly.
PCI Latency Timer (PCI Clocks)
This option specifies the latency timings in PCI clocks for all PCI devices.
The settings are
32
,
64
,
96
,
128
,
160
,
192
,
224
, or
248
.
PCI VGA Palette Snoop
The settings for this option are
Disabled
or
Enabled.
When set to
Enabled,
multiple VGA devices operating on different buses can handle
data from the CPU on each set of palette registers on every video device.
Bit 5 of the command register in the PCI device configuration space is the
VGA Palette Snoop bit (0 is disabled). For example: if there are two
VGA devices in the computer (one PCI and one ISA) and this option is
disabled, data read and written by the CPU is only directed to the PCI
VGA device's palette registers. If enabled, data read and written by the
CPU is directed to both the PCI VGA device's palette registers and the
ISA VGA palette registers. This will permit the palette registers of both
devices to be identical. This option must be set to
Enabled
if any ISA
adapter card installed in the system requires VGA palette snooping.
Summary of Contents for Super 370SCD
