D-10
SC825 Chassis Manual
D-10 SCSI (Super) GEM Installation on Windows
Operating System
Please refer to the following instructions to install the SCSI GEM driver for the
Windows operating system.
(*Note: This driver is not necessary for other operating systems. If you have two
SCA backplanes, you will need to install the driver twice.)
The driver is located on the Supermicro motherboard driver CD, or is available for
download from our FTP site:
ftp://ftp.supermicro.com/driver/Qlogic/
Follow the procedure below to install this driver onto your system.
Method One: Installing the Driver
Right click on
1.
My Computer
and choose
Properties
.
Select the
2.
Hardware
tab and click on
Device Manager
.
Open
3.
Other Devices
or where
GEM318
is visible.
Right click on this device and select
4.
Properties
.
Click the
5.
Driver
tab and select
Update Driver
.
Click
6.
Next
twice, uncheck both the
Floppy Disk Drives
option and the
CD-
ROM Drives
option, then select
Specify a Location
and select
Next
.
Click
7.
Browse
and select the D drive or where
Supermicro Setup CD
is vis-
ible.
Select the
8.
Qlogic
folder and click
Open
.
System will automatically detect GEM318 and install the driver.
9.
The following optional installation method may also be used to install the
driver,
