Supero SC815S-560 User Manual Download Page 74

Page: 74 / 84

D-2

SC815 Chassis Manual

D-3 An Important Note to Users

All images and layouts shown in this user's guide are based upon the latest PCB

•

Revision available at the time of publishing. The card you have received may or
may not look exactly the same as the graphics shown in this manual.

D-4 Introduction to the SCA-813S Backplane

The SCA-813S backplane has been designed to utilize the most up-to-date technol-
ogy available, providing your system with reliable, high-quality performance.

This manual reflects SCA-813S Revision 1.00, the most current release available at

the time of publication. Always refer to the Supermicro Web site at www.supermicro.

com for the latest updates, compatible parts and supported configurations.

Summary of Contents for SC815S-560





















































































Search results

Summary of Contents for SC815S-560

Reviews:

Related manuals for SC815S-560

Brands by name

Popular brands

Supero SC815S-560, User Manual

Search results

Summary of Contents for SC815S-560

Reviews:

Related manuals for SC815S-560

Brands by name

Popular brands