Supero SC815S-560, User Manual

Page: 39 / 84

5-11
Chapter 5: Chassis Setup and Maintenance
Installing an Expansion Card
Confirm that you have the correct riser card for your chassis model and the 1.
add-on card includes a standard bracket.
Remove the chassis cover. 2.
Install the riser card by sliding card into the appropriate slot in the mother- 3.
board. For more information, see the riser card installation instructions.
Choose the I/O panel in which to place the add-on card. 4.
In that slot, open the I/O panel lever and slide the I/O panel sideways. 5.
From inside the chassis, remove the I/O panel. 6.
Slide the add-on card into the riser card and attach the add-on card bracket 7.
in place of the I/O panel.
Secure the add-on card by closing the I/O panel lever. 8.
Connect cables to the add-on card as necessary. 9.
Figure 5-11: Chassis with a Riser Card ("U" Models Only)
Riser Card