Supero SC502 Series, User Manual

Page: 36 / 40

SC502 Chassis Manual
A-2
The SNK-P00A4 active heatsink may only be used on specific motherboards, due
to its larger 4" x 4" size.
This is particularly important in systems utilizing Intel
Celeron 400 series platforms.
To ascertain which heatsink is appropriate for your
motherboard, refer to the Supermicro Web site at http://www.supermicro.com.
Extending Power Cables
Although Supermicro chassis are designed with to be efficient and cost-effective,
some compatible motherboards have power connectors located in different areas.
To use these motherboards you may have to extend the power cables to the mother
boards. To do this, use the following chart as a guide.
Power Cable Extenders
Number of Pins Cable Part # Length
24 pin CBL - 0042 7.9”(20 CM)
20 pin CBL - 0059 7.9”(20 CM)
8 pin CBL - 0062 7.9”(20 CM)
4 pin CBL - 0060 7.9”(20 CM)
Front Panel to the Motherboard
The SC502 chassis includes a cable to connect the chassis front panel to the
motherboard. If your motherboard uses a different connector, use the following list
to find a compatible cable.
1U Active Heatsink (SNK-P0032A4)
It is critical to choose the correct heatsink for your motherboard, that will fit in the
SC502 chassis.
Intel Celeron 400 seriew (35W) platform: Active heatsink SNKP0032A4
Low power platforms under 20W: Passive heatsink SNKP0016P
1.
2.
Figure A-2: SNK-P00A4 Active Heatsink