Supero SC111 Series, User Manual

Page: 30 / 64

SC111 Chassis Manual
5-6
Figure 5-5: DVD and USB Com Port Installation
If replacing an existing DVD-ROM drive or USB com port, remove the drive 6.
screws (F), place the replacement drive into the drive tray, and replace the
drive tray mounting plates (G), using the drive screws.
If installing a USB com port, gently slide the assembled drive, drive tray and 7.
drive tray mounting plates into the chassis.
If installing a DVD-ROM drive, gently slide the assembled drive, drive tray,
drive tray mounting plates, and the DVD-ROM drive adapter board into the
chassis and secure
Reattach the drive tray to the chassis by replacing the mini-bezel lock screw, 8.
and tightening it from inside the chassis.
Reconnect the data and power cables. 9.
Replace the chassis cover, return the server to the rack if necessary, and 10.
power up the system.
1 F
1 G
1 G
1 G
1 F