3-1
Safety Information and Technical Specifi cations
Chapter 3:
Installation Procedures
3-1 Tools
Needed
The following tools are neeed for the installation of the mobile rack into the chas-
sis:
• Phillips
head
screwdriver
• Antistatic
Strap
(recommended)
3-2 Important Safety Guidelines
This product should be assembled and/or serviced by qualifi ed and experienced
technicians. To avoid personal injury and property damage, carefully follow the
guidelines listed below.
Before accessing the Mobile Rack:
1. Turn off all peripheral devices and the power supply connected to the chassis and
unplug all power cords from the system or the wall outlets.
2. Disconnect all the cables and label the cables for easy identifi cation.
3. Use a grounded wrist strap designed to prevent static discharge when handling
components.
4. Save all the screws and fasteners for later use. (If necessary, label these screws
or fasteners for easy identifi cation.)
5. Follow the instructions given in the following section to remove and install the
cooling fan, hard disks and the rear window.
