3-2
SAS M35TQ Mobile Rack
User's Guide
To remove a hard drive tray from the mobile rack:
1. Push the release button located beside the drive LED's.
2. Swing the handle outward and pull out the unit.
3-3 Installation
Procedures
Use the following installation procedures to set up the Mobile Rack.
For the SAS-M35TQ:
1. SAS IDs are assigned automatically by the backplane. Do not set
ID's manually on the drives.
2. SAS termination is enabled by default on the SAS backplane.
!
Mobile Rack Hard Drives
The drives are mounted in drive carriers to simplify their installation and removal
from the chassis. These carriers also help promote proper airfl ow for the drive
bays.
Figure 3-1: Chassis Drive Tray
Release Button
