2-28
PDSM4+/PDSME+ User's Manual
Keyboard Wake-Up
The JPWAKE jumper is used together with
the Keyboard Wake-Up function in the BIOS.
Enable both the jumper and the BIOS setting
to allow the system to be woken up when the
user hits a key on the keyboard. See the table
on the right for jumper settings. Your power
supply must meet ATX specifi cation 2.01 or
higher and supply 720 mA of standby power
to use this feature.
Keyboard Wake-Up
Jumper Settings
Pin# Defi nition
Pins 1-2
Enabled (*default)
Pins 2-3
Disabled
USB Wake-Up
The Front Panel USB Wake-up jumper (JUSB1)
and Back Panel USB Wake-up Jumper (JUSB2)
are used together with the BIOS. Enable both
the jumper and the BIOS settings to allow the
system to be woken up when a FP USB or a
BK USB device receives incoming signals. See
the table on the right for jumper settings. Your
power supply must meet ATX specifi cation
2.01 or higher and supply 720 mA of standby
power to use this feature.
FP USB/BP USB Wake-Up
Jumper Settings
Pin# Defi nition
Pins 1-2
Enabled (*default)
Pins 2-3
Disabled
PCI-X 133 MHz
S
UPER PDSM4+
®
Dural Core CPU
LGA 775
KB/MS
COM1
GLAN1
Fan5
North Bridge
LAN
CTRL
JPL1
SCSI
SATA1
Fan4
Buzzer
JLED
IDE
24-Pin ATX PWR
ICH7R
DIMM#1A (Blue)
DIMM#1B (Black)
DIMM#2A (Blue)
DIMM#2B (Black)
J B T 1
South Bridge
JPW2
8-pin PWR
SATA3
Fan2
Battery
JPA1
Fan3
JPA2
PCI-X#1 100MHz
SCSI Channel
FP CTRL
L E 3
SATA0
SATA2
JWOR
J W D
SPKR
(Green Slot*PDSM4+)
USB 1,2
VGA
GLAN2
LAN
CTRL
BIOS
SIM 1U Slot
Slot1
Slot2
Slot4
PCI-E x4
Slot5
Slot6
PCI-X 133 MHz
VGA
PXH
JP6
Slot7
PCI-E x8
LE1
L E 4
JPF
Fan1
CPU Fan6
PW3
JL1
JPWAKE
Floppy
COM2
PWR I
2
C
JPUSB1
JPR1
SI/O
HW
793
JPL2
USB3
JUSB2
CTRL
JPG1
WOL
Video
Memory
CTLR
JP5
PCI-X#2 100MHz ZCR
A. Keyboard Wake-up
B. FP USB Wake-up
C. BP USB Wake-up
A
B
C
