Chapter 2: Configuring BMC/IPMI Settings
2-43
2.6.1 Maintenance - Firmware Update
When you click <Maintenance> in the Menu bar, the Maintenance Main page will
display as below.
Firmware Update
Enter Update Mode:
Click this item to enter the update mode.
Warning
: Once you've entered the firmware update mode, the device will
be reset even if you cancel the process of firmware updating.
Notes:
1. When updating firmware, you are given the option to "Preserve Con
-
figuration." Uncheck this option to load the factory default settings, and all
the configuration settings will be lost.
2. If you are using the Static IP mode, it is not recommended to uncheck
"Preserve Configuration," since it will reset the network settings to the
DHCP (Dynamic Host Configuration Protocol) mode.
