Supero H8QI6-F, User Manual

Page: 56 / 82

4-6
H8QI6/i-F Serverboard User’s Manual
PCI IDE Busmaster
Use this setting to Enable or Disable BIOS enabled uses of PCI Busmastering
for reading or writing to IDE drives.
Offboard PCI/ISA IDE Card
Some PCI IDE cards may require this option to be set to the PCI slot number
that is holding the card. The Auto setting works for most PCI IDE cards. Op-
tions include Auto , PCI Slot 1, PCI Slot , PCI Slot 3, PCI Slot 4, PCI Slot 5
and PCI Slot 6.
IRQ3 ~ IRQ15 Settings
These settings specify if IRQ is available to be used by PCI/PnP devices or is
reserved for use by legacy ISA devices. Options are Available or Reserved.
DMA Channel 0 ~ DMA Channel 7 Settings
These settings specify if a DMA Channel is available to be used by PCI/PnP
devices or is reserved for use by legacy ISA devices. Options are Available or
Reserved.
Reserved Memory Size
This option specifi es the size of the memory block reserved for legacy ISA de-
vices. Options include Disabled , 16k, 32k or 64k.
Onboard NIC Option ROM
This option Enables or Disables the onboard NIC option ROM.
Onboard LSI SAS Option ROM
This option Enables or Disables the onboard LSI SAS option ROM.
SuperI/O Confi guration
Serial 1 Address
This option specifi es the base I/O port address and Interrupt Request address
of serial port 1. Select "Disabled" to prevent the serial port from accessing any
system resources. When this option is set to Disabled , the serial port physically
becomes unavailable. Select "3F8/IRQ4" to allow the serial port to use 3F8 as its
I/O port address and IRQ 4 for the interrupt address. Options include Disabled,
3F8/IRQ4 , 3E8/IRQ4 and 2E8/IRQ3