Supero H8QI6-F, User Manual

Page: 44 / 82

H8QI6/i-F Serverboard User's Manual
2-22
Installing the OS and Drivers
With the Windows OS installation CD in the CD-ROM drive, restart the system.
When you see the prompt, hit the <F6> key to enter Windows setup. Eventually a
blue screen will appear with a message that begins "Windows could not determine
the type of one or more storage devices . . ." When you see the screen, hit the <S>
key to "Specify Additional Device", then insert the driver diskette you just created
into the fl oppy drive. Highlight "Manufuacturer Supplied Hardware Support Disk"
and hit the <Enter> key. Highlight the fi rst "nVidia RAID" driver shown and press
the <Enter> key to install it. Soon a similar blue screen will appear again. Again hit
the <S> key, then highlight the second item, "nForce Storage Controller" and press
the <Enter> key, then <Enter> again to continue with the Windows setup.
Figure 2-5. DOT-Hill RAID Utility Program Screen
Using the Dot Hill RAID Utility
The Dot Hill® RAID Utility program is where you can defi ne the drives you want to
include in the RAID array and the mode and type of RAID.