Supero H8QGL-6F, User Manual

Page: 65 / 86

Chapter 4: BIOS
4-5
Node Interleaving
This setting allows you to enable Node Interleaving in the system. Options
include Auto and Disabled .
Channel Interleaving
This setting allows you to enable Channel Interleaving in the system. The
options are Auto and Disabled.
CS Sparing Enable
This setting will reserve a spare memory rank in each node when enabled.
Options are Enable and Disable .
Bank Swizzle Mode
This setting enables or disables the Bank Swizzle Mode. Options are Enabled
or Disabled.

ECC Confi guration
ECC Mode
This submenu sets the level of ECC protection. Options include Disabled,
Basic , Good, Super, Max and User. Selecting User activates the other option
for user setting.
Note: The "Super" ECC mode dynamically sets the DRAM scrub rate so all
of memory is scrubbed in 8-hours.
DRAM ECC Enable
This setting allows hardware to report and correct memory errors
automatically, maintaining system integrity. Options are Enabled or
Disabled.

DRAM Timing Confi guration
DRAM Timing Confi g
This setting specifi es the DRAM timing confi guration. Options are Auto and
Manual.
HT Speed Support
This setting allows you to select the HT Frequency to use. Cold reset is
needed after changing an option for this setting. Option include Auto and HT1.