Supero H8QGL-6F, User Manual

Page: 38 / 86

H8QGL-6/iF SERVERBOARD USER'S MANUAL
2-12
SMBus Header
The header at SMBus is for the
System Management Bus. Connect
the appropriate cable here to utilize
SMB on the system. See the table on
the right for pin defi nitions.
SMBus Header
(SMBus)
Pin Defi nitions
(JSMB1)
Pin# Defi nition
1 Data
2 Ground
3 Clock
4 No Connection
SGPIO
The T-SGPIO1/ T-SGPIO2 (Serial
G e n e r a l P u r p o s e I n p u t / O u t p u t )
headers provide a bus between the
SATA controller and the backpane to
provide SATA enclosure management
functions. Connect the appropriate
cable from the backplane to the
T-SGPIO1 header to utilize SATA
management functions on your system.
Likewise, the 3-SGPIO1/3-SGPIO2
headers provide the same function
between the SAS controller and the
backpane, and have the same pin
defi nitions (only on H8QGL-6F)
SGPIO Header Pin Defi nitions
(T-SGPIO1/T-SGPIO2)
(3-SGPIO1/3-SGPIO2))
Pin# Defi nition Pin# Defi nition
1 NC 2 Data
3 Ground 4 Data
5 Load 6 Ground
7 CLK 8 NC
Note: NC indicates no connection.
LAN1/2 (Ethernet Ports)
Two Gigabit Ethernet ports (designated
LAN1 and LAN2) are located beside
the VGA port. Additionally, there is a
dedicated LAN for IPMI on top of the
two rear USB ports. These Ethernet
ports accept RJ45 type cables.
LAN Ports (LAN1/2)
Pin Defi nition
Pin# Defi nition Pin# Defi nition
1 P2V5SB 10 SGND
2 TD0+ 11 Act LED
3 TD0- 12 P3V3SB
4 TD1+ 13 Link 100 LED
(Yellow, +3V3SB)
5 TD1- 14 Link 1000 LED
(Yellow, +3V3SB)
6 TD2+ 15 Ground
7 TD2- 16 Ground
8 TD3+ 17 Ground
9 TD3- 18 Ground
Note: NC indicates no connection.